The Engine

Magnum 5.9 engines commonly carried a rating of 245 horsepower, with the tiny factory hydraulic roller camshafts delivering a hair over . 400-inch lift.

Moreover, How can you tell a 5.9 Magnum?

All Magnum engines are stamped either 360 or 318 on the driver’s side near the rear of the block. The casting number found on all 360 Magnum blocks is 5302006, whereas the 5.2/318 Magnums are 53006714 or 53006657. Otherwise, the 5.2 and 5.9 appear pretty much identical.”

How can I get more power out of my 5.9 Magnum?

The power output of the 360 Magnum engine can be increased with performance aftermarket modifications.

Also Is a 5.9 Magnum a Hemi? The 5.9 is the old school engine family of the 318/340/and obviously the 360. The preferred engine would be the Hemi. It will use less gas as the 5.9 is a gas hog in the 2003 Ram. The Hemi isn’t….that is, it isn’t a Hemi like the old 426s.

What oil does a 5.9 Magnum take?

Engine Oil

23 Related Questions Answers Found

What’s the difference between a 5.2 and a 5.9 Dodge engine?

The 5.2 breathes a little better with the better cam, so it takes in more air/fuel relative to it’s displacement than a lesser-cammed 5.9 Mag. Despite having a milder cam, the 5.9 has more power due to simple displacement. Put the 5.2 Mag cam in the 5.9 Mag and it’ll pick up a few more HP.

Does Dodge make a 5.9 gas engine?

The 5.9 V8 gas engine was indeed made by Dodge. It was part of the LA engine family which included the 273, the 318, the 340, the 360 (5.9) and the 488 V10 and was made from 1971 to 2002. It was reliable and moderately powerful but very thirsty.

Is the Dodge 5.9 a Hemi?

5.9 L Magnum V8

In 1993, Chrysler Corporation released the next member of the Magnum family: the 5.9 L V8. … The 5.9 L Magnum was available until the 2003 model year, when it was replaced with the 5.7 L Hemi V8 engine.

How much does a 5.9 Magnum weigh?

Registered. I was reading about this recently at the Cummins web site and they said a 5.9 liter Cummins diesel weighs 970 lb, whereas the magnum 360 V-8 weighs 540 lbs.

How much horsepower can you get out of a 360?

After-market support for the 360 is great, and with the right parts, it can easily make 450 horsepower and still have great street manners. If you need more inches, it’s easy to drop in a stroker crank and get 406 cubic inches.

Does Dodge make a 5.9 engine?

The 5.9 V8 gas engine was indeed made by Dodge. It was part of the LA engine family which included the 273, the 318, the 340, the 360 (5.9) and the 488 V10 and was made from 1971 to 2002. It was reliable and moderately powerful but very thirsty.

Which is better Hemi or Magnum?

Power! The fact is, Hemi engines just aren’t making more horsepower than the hot-rod Magnum engines. … In short, the Hemi will cost substantially more, require considerably more work and re-engineering of your car, and deliver roughly the same (or worse) performance as a Magnum engine.

How much oil does a 5.9 Dodge take?

All 5.9L Cummins turbodiesels (6BT and ISB) feature a 12 quart oil capacity (with filter change) and share the same oil filter.

What is the difference between 10w30 and 5w30 oil?

10w30 is thicker than 5w30 because it has a higher viscosity in low temperatures. The engine oil will flow slower than 5w30 during the cold season. Thicker or higher viscosity metal oil has a better seal compared to low viscosity oil. Thicker oil offers better lubrication of motor and engine parts.

What kind of oil does a 1996 Dodge Ram 1500 5.9 take?

SAE 10W-30 is preferred.

How do you tell if I have a 318 or 360?

Another way is you could look at the harmonic balancer, if it is a skinny, flat one it is a 318, a 360 one will be thicker and have a counter weight on the face.

What size is a 5.9 liter engine?

The Chrysler/Dodge 360 Magnum is a 5.9 l (5,899 cc, 360.0 cu.in.) natural aspirated V8 90° four-stroke gasoline engine from Chrysler LA/Magnum-family. This engine was manufactured from 1992 up to 2003.

Is the Dodge 5.2 a good motor?

5.2 Magnum Reliability

The 5.2 Magnum used in Dodge trucks and Jeeps is a pretty solid engine. It doesn’t suffer cylinder head cracks to the same extent that the 5.9 Magnum does. Additionally, the internals and major engine components seem to be fairly strong and adequate for good longevity at stock power levels.

How long will a Dodge 5.9 Magnum last?

If maintained, it seems that 200,000 to 300,000 seems about right. It all depends on how well it has been taken care of. And there were two main issues with the magnum motors.

Are 5.2 and 5.9 transmission the same?

There not interchangeable. Other then that,it’s the same. Ask for the build sheet for the 5.2 and the 5.9 then you’ll know the difference.

What’s the difference between a 5.7 and a 5.9 engine?

Registered. the 5.7 is built for power an speed in mind while the 5.9 is more tq…you’ll see more performance mods available for the 5.7 vs the 5.9’s..

How many horsepower is a 5.7 L Hemi?

5.7L HEMI® V8

The 5.7L V8 HEMI® engine is available only on the R/T trim This engine offers 370 horsepower with 395 lb-ft of torque. With this powerful HEMI® upgrade, you’ll get a 0-60 mph of 5.2 seconds and a ¼ mile time of 13.7 seconds.

Is a 5.7 a Hemi?

The Dodge 5.7L HEMI engine is also commonly referred to as the 345 HEMI in honor of its 345 cubic inch displacement. … The 5.7 HEMI remains much the same today, however it did go through updates to improve power and fuel efficiency. Overall, it’s a reliable engine with stout performance and sounds.

Is the Dodge 360 a good motor?

The Dodge 360 is a good motor, not a ton of power but reliable, its everything else you need to be worried about.

How much HP can a stock 350 block?

With a stock block, using after market crank, rods, pistons, bolts, heads, etc., you could expect a small block 350 to make upwards of 450 HP and for it to reliably handle upwards of 550 – 600 HP, and a big block with the same aftermarket components to make power in the 500 to 600 HP area, and be able to handle upwards …

How much power can a stock 350 bottom end handle?

Re: How much can a stock bottom end handle

Assuming it was correctly rebuilt, a completely stock bottom end – main bolts, cast crank, stock rods, cast pistons is good to around 350 HP.

ncG1vNJzZmiZlKG6orONp5ytZ5ikxG651JyfZqifrLKzecKapWaZXWp6ennMmp6nrZ1itaK6w6WcZmpf